RusHydro starts up two new 640 MW turbine units at Sayano-Shushenskaya

Sayano-Shushenskaya Hydropower Plant

Editor's Note: This article was republished with permission from HydroWorld.com sister site RenewableEnergyWorld.com

JSC RusHydro, Russia’s largest power-generating company, has announced that a new 640-MW hydropower unit has been commissioned at the company’s Sayano-Shushenskaya hydropower plant (HPP), in addition to the other 8 hydropower units in operation at the plant.

Russian President Vladimir Putin last week congratulated the participants during the opening ceremony through a videoconference with the Sayano-Shushenskaya HPP, which is the country’s largest hydro plant. The videoconference was part of the President’s visit to the Nizhne-Bureyskaya HPP in the Amurskiy region, which is currently under construction. 

With the additional unit, the combined operating production capacity is 5,120 MW. The Sayano-Shushenskaya HPP will add two another units to the eight (units) in June and in October, thus hiking the total capacity to 6,400 MW.

“The reconstruction of the Sayano-Shushenskaya hydropower plant has reached its final stage. In 2014 the plant will be fully equipped with new up-to-date equipment with enhanced performance characteristics that meet all safety and reliability requirements. The useful life of the new units has been extended to 40 years and maximum efficiency now reaches 96.6 percent,” Jurij Popov, a senior RusHydro communications specialist, told RenewableEnergyWorld.com. The units will also improve energy and cavitation features,” he added. For example, the turbines will be fitted with a more efficient process protection system, which will automatically shut down the unit in case of any inadmissible deviations.

The total cost of reconstruction is estimated at $1.2 billion, and $94.1 million is to be disbursed for the works in 2014, according to Popov.

The plant’s unit 4, the latest addition, was re-started in August 2010 following significant repairs after a major accident at the plant. The accident took place when the current RusHydro CEO Jevgenij Dod had just taken charge of the company and his first major challenge was handling the situation at the accident- ravaged Sayano-Shushenskaya HPP.

As a result, the plant’s unit 4 was decommissioned and reconstruction was ordered.

The necessary hydro power units for the plant are being manufactured by Power Machines, which is also responsible for equipment installation.

In 2013, power from the Sayano-Shushenskaya HPP made up 20 percent of the total RusHydro generation, or 23.5 million kWh. For comparison, the hydropower plant produced 19.7 million kWh in 2011 and 19.09 million kWh in 2012.

“The generation capacity is expected to remain in the range of 25 million kWh after the reconstruction is completed,” Popov said.

Including the Sayano-Shushenskaya HPP, the largest in Russia, RusHydro runs over 70 renewable energy facilities: 9 power stations in the Volga-Kama Cascade with a total installed capacity of more than 10,167 MW, including the 1330-MW Zeiskaya HPP – the first large-scale hydro-power plant in the Russian Far East, the 2, 010-MW Bureiskaya HPP, the 455-MW Novosibirsk HPP and dozens additional plants in the North Caucasus.

HydroVision International 2014 Keynote Speakers

Presenting the HydroVision International 2014 Keynote Speakers

Check out a slideshow covering the keynote speakers at the HydroVision International 2014 conference and exhibition

Click Here >>

Hydro Industry Financials

Buyers Guide Products

Pump Turbines

For new and upgraded pump-turbines, American Hy...

Rehabilitation and Total Plant Upgrades

Turbine rehabilitation is directed by turbine e...

Weir Turbines, Francis

American Hydro can supply the turbine or the co...

Weir Turbines, Kaplan

Rugged reliability. This is the foundation of o...

Temporary Bulkheading for Valve Replacement

Hibbard Inshore can design, insert, and remove ...

PXL Kaplan Turbine Seals

Provides sealing for Kaplan turbines with seali...

Most Read Articles

Recent Comments

Buyers Guide Companies

Fematics Canada

Engineers and manufactures mechanical seals for...

Gracon Corp

Offers turbine and heavy mechanical installatio...

Paul Willis PE

Conducts hydro turbine related equipment studie...

Leroy Somer

Manufactures alternators from the power range b...

MJ2 Technologies SAS

MJ2 Technologies is the designer and manufactur...

Continuing Education

Professional Development Hours
To access a course listing associated to a specific topic listed below, click on the topic of choice from the list below.

09/01/2014
Volume 33, Issue 7
cover
07/01/2014
Volume 22, Issue 4
file

Archived Articles

2006 | 2007 | 2008 | 2009 | 2010 2011 | 2012 | 2013
Hydro Review Past Issues